UCD Crest Siemens RoboRugby Autonomous Robot Design Competition Siemens Logo
blank
blank
HOME   |   SESSIONS   |   KIT   |   COMPETITION   |   NEWS   |   FAQ   |   LINKS
blank

 

Motors etc.

NamePictureQuantityLocationComment
Lego Motor 714272XA pair of motors for driving robot.  It is important to use two motors of the same type to drive the two sides of the robot - otherwise it will be difficult to make it drive in a straight line!
Lego Motor - other type1XThe third motor in the kit may be of different type - the picture shows type 43362 (lighter, but slightly slower than 71427)

For details, click here

Lego to Handyboard cable - short2XTo connect a motor to the Handyboard, 30 to 40cm
Lego to Hanyboard cable - long1XTo connect a motor to the Handyboard, about 60cm
Motor mounting plates12XUse to mount motor in Lego frame
Servo actuator - modified for Lego1XFor precise control of position/angle

For details, see servo page

 

blank
blank
blank
HOME   |   SESSIONS   |   KIT   |   COMPETITION   |   NEWS   |   FAQ   |   LINKS
blank
Copyright 2015, UCD School of Electrical, Electronic and Communications Engineering.  Contact e-mail address